Use a syringe to reduce the drop of debris from the infusion bottle stopper

The medical staff of the syringe manufacturer studied carefully in practice and summed up some methods to reduce the dandruff of infusion bottle stopper:

1. The use of side hole needle can significantly avoid the chipping of rubber plug. Compared with the visible rubber particles in the dispensing process, the side-hole needle syringe has no cutting effect on the rubber plug when dispensing, which can greatly reduce the generation of rubber particles. And bevel needle because of the sharp edge of the bevel cutting surface, it is easy to cut off the rubber plug when piercing the rubber plug, forming a larger rubber plug chip. Therefore, the use of side-hole syringes can reduce the risk of infusion, help to reduce disputes, and protect patients as well as medical staff themselves.

2. Use less than 12# needles as far as possible, and try to reduce the number of needle puncture rubber plug, especially to avoid repeated puncture in the same part of the rubber plug.

3. Pay attention to the puncture Angle and avoid the puncture needle colliding with the glass part of the bottleneck.